SS-G108
Sino Star
| Quantity: | |
|---|---|
Product name : Drying Remover Gun
Model number: SS-G108
Technical Specification:
| Model | SS-G108 |
| Weight | 1KG |
| Air Flow Rate | 160L/min at 0.5 Mpa |
| Air Pressure | 0.4 to 0.8 Mpa |
| Application | Dust removal,Draining.Coling |
| Solution | PH=7 |
| Operate TEMP | 10-50 |
| Spray particle | 5UM-10UM |
Function:
Special remove the dirt and dust on the surface and in the gap.
Maintenance Method:
You have to clean and dry the tool after using it, otherwise, the liquid wuill damage inside the tool due to the dust and bacteria, so that cut down the working lift.
Clean method: make the bell into the water and hold down the trigger, then dry it and put it on the place where ventilated. Dry and have not sun shine.
As below:
Clean the equipment, you only put the bell into the water and hold down the trigger about 1-3 seconds.
Product name : Drying Remover Gun
Model number: SS-G108
Technical Specification:
| Model | SS-G108 |
| Weight | 1KG |
| Air Flow Rate | 160L/min at 0.5 Mpa |
| Air Pressure | 0.4 to 0.8 Mpa |
| Application | Dust removal,Draining.Coling |
| Solution | PH=7 |
| Operate TEMP | 10-50 |
| Spray particle | 5UM-10UM |
Function:
Special remove the dirt and dust on the surface and in the gap.
Maintenance Method:
You have to clean and dry the tool after using it, otherwise, the liquid wuill damage inside the tool due to the dust and bacteria, so that cut down the working lift.
Clean method: make the bell into the water and hold down the trigger, then dry it and put it on the place where ventilated. Dry and have not sun shine.
As below:
Clean the equipment, you only put the bell into the water and hold down the trigger about 1-3 seconds.
